Journal

Marchand Wall and Ceiling Boards: Why Cohesion Is the New Luxury

Wall and ceiling boards in the same oak palette as the flooring, at exactly half the board width, so joins align across every surface.

Oak Flooring Auckland: What to Know Before You Buy

Auckland humidity, E3 compliance, underfloor heating and installation methods. What to check before committing to an oak floor in Auckland.

Repairing an Oak Floor: Dents, Scratches and Replacing a Single Board

Damage to one board almost never means replacing a floor. Here is how each level of repair actually works.

What Is the Finished Height of Marchand Oak Flooring?

21mm installed, including adhesive. It governs door clearances, joinery alignment, thresholds and stair rises, and it is almost free to get right early.

Laying Timber Flooring Over Existing Vinyl

Old vinyl bonded to concrete can be brutal to remove. Leaving it in place is often the better decision, provided the preparation is done properly.

Can I Lay My Own Oak Flooring?

Yes, if you are reasonably handy. What decides the result is understanding how the product is supplied, and knowing which three parts of the job to hand over.

What the Lacquer Actually Does

The coating decides how a floor looks in year ten. We use two systems, and we have watched both handle the situations that actually occur in houses.

Can I Use a Robotic Vacuum and Mop on My Oak Floors?

Yes, and they tend to keep a floor in better condition than intermittent hand cleaning does. The moisture concern is reasonable, and it does not apply to these machines.

Do You Need Expansion Gaps with European Oak Flooring?

Most NZ guidance calls for a 10 to 15mm perimeter gap. That guidance is right for the products it was written for, and one variable decides whether it applies.

Oak Stairs: Slip Resistance, Nosings and Where the Waste Goes

Stairs carry a compliance requirement the rest of the floor does not, and they generate more waste than any other element. Three things decide whether the detail works.